email
call
Toll Free (877) 344-4433
call
Paradise Hill (306) 344-4448
Home > New Holland Showroom > Direct Cut Auger Heads
Schedule a Test Drive

Get a Trade-In Quote

Trim is the manufacturer's way of differentiating the level of equipment installed on models of the same name. (Example: Triburon GLS, Expedition XLT, Trailblazer LS)

Give Me Your Best Price

Get More Information

Direct Cut Auger Heads
Overview







Direct Cut Auger Heads





CUTTING-EDGE HARVESTING PERFORMANCE

New Holland offers a complete selection of direct-cut heads, providing you with the versatility to match your crops and your operational needs. High-capacity rigid and flex heads deliver fast, clean cutting in tough field conditions, as well as reliable feeding, even in the heaviest crop conditions.



72C DIRECT-CUT RIGID CUTTERBAR AUGER HEADS

 

FAST, ADJUSTABLE, EFFECTIVE HARVESTING

Available in 25- and 30-foot widths, 72C direct-cut auger heads cut crop cleanly and quickly, then deliver it smoothly and evenly to the feederhouse to maintain huge New Holland combine capacity. Convenient adjustments allow you to easily adapt to conditions for top efficiency and production.


FAST CUTTING

An impressive knife speed up to 1150 cuts per minute and twin-knife drive allows you to harvest at higher ground speeds. The large 42-inch-diameter reel lifts lodged crop and is fully adjustable. A single lever on the side of the head allows you to adjust finger angle for different crops, while hydraulic fore-and-aft adjustments from the cab allow you to make precise feeding changes in different conditions.


SMOOTH, EVEN CROP FEEDING

The 26-inch-diameter, full-floating auger features full-width retracting fingers between each auger flight to move crop down and under the auger for smooth, continuous feeding, even in the heaviest crop conditions. The auger can be adjusted fore, aft, up or down.
 



740CF DIRECT-CUT SUPERFLEX™ CUTTERBAR AUGER HEADS

 

FLEXIBILITY FOR PRECISE HARVESTING EFFICIENCY

If you harvest in undulating terrain, the 740CF direct-cut SuperFlex™ auger head is the natural choice. Available in cutting widths of 20, 25, 30, and 35 feet, 740CF heads feature a patented, rubber spring flotation system that allows heads to follow ground contours more closely so you get every bit of your crop. The SuperFlex knife bed flexes a full 4.5 inches to ensure a close cut and uniform stubble height in uneven fields.

 

EFFECTIVE FROM THE VERY START

The effectiveness of 740CF heads starts at the very front with crop dividers that present the most down and tangled crop to the six-bat reel, which smoothly conveys crop to the cutterbar and auger. When combined with 1150 cuts per minute and the cab-based, hydraulic, fore-and-aft reel adjustment, precise feeding and processing are a given. You can even maintain a pre-set ratio between reel speed and ground speed, so that when ground speed changes, feeding remains consistent.


CLOSE CUTTING

The cutterbar floor profile includes an integral hump that stops rocks from entering the cutterbar, while also preventing beans from rolling off the front. A shorter skid shoe design reduces weight and allows the cutterbar to cut closer to the ground for even better cutterbar flexing. The header height control system makes use of either four-sensor or two-sensor combine systems. The cutterbar uses standard three-inch guards and overserrated knife sections with 10 teeth per inch for clean cutting.


EASY FLOTATION ADJUSTMENT

You can manually adjust the rubber torsion springs on each floor support to adjust the flotation or to compensate for any unevenness in the cutterbar. Hydraulic cutterbar flotation adjustment is available as a dealer-installed accessory to allow you to make adjustments right from the combine cab.


SMOOTH FEEDING

A 26-inch-diameter auger with deep, five-inch flighting handles heavy crop and feeds it smoothly into the combine. A five-degree flatter auger floor angle enhances crop flow. Adjusting the auger up, down, fore and aft has been simplified. And, a new, patented rubber retention system prevents broken auger fingers from entering the combine.



760CG VARIFEED™ RIGID CUTTERBAR AUGER HEADS

 

ADAPT TO ALL TYPES OF CROP

For optimum harvest quality and a uniform cut in different crop heights, including tall, bushy, direct-cut canola, the Varifeed™ grain head is your perfect partner. Both the 30- and 35-foot models allow you to harvest at high field speeds to make full use of the high capacity of New Holland combines


EFFORTLESS, ON-THE-GO KNIFE ADJUSTMENT

You can adjust knife position a full 23 inches fore and aft so you can regulate the flow of crop right from the cab for ideal feeding. With the varying distance between knife and intake auger, the header reel plays a more important role in crop guidance and crop feeding. You can also adjust the reel electro-hydraulically in all directions from the cab for smooth, continuous feeding. If you direct-cut canola, Varifeed heads are ideal since the 23 inches of floor travel allow ample room for the bushy canola crop. The header floor remains closed in all knife positions, without the need for filler plates or drive belt changes.


FULLY INTEGRATED SIDE KNIVES

Optional 18-teeth vertical side knives are ideal to direct cut canola or other bushy crops. They slice through matted crops and are controlled through the IntelliView™ IV color touch-screen monitor. When not required, they can be stored on the header itself.


LARGE-DIAMETER AUGER

The 26-inch-diameter auger with deep flights provides fast, smooth feeding even in the heaviest crops. Full-width retracting fingers between each auger flight move crop down and under the auger.


BUILT-IN DURABILITY

Rugged frame construction and heavy-duty features like the high-speed knife drive, the extended reach of the reel tines and hydraulic reel drive help assure reliable cutting, ample torque and feeding capacity in heavy crops.

 
Direct Cut Auger Heads - Blog