WEIGHT
Total 7,300 lbs. (3311 kg)
Tongue Weight (Bale loader fully raised) 2,550 lbs. (1156 kg)
Tongue Weight (Bale loader down) 2,150 lbs. (975 kg)
TRANSPORT DIMENSIONS (Bale loader fully raised, deflector folded)
Width 101 in. (2.56 m)
Length 211 in. (5.36 m)
Height 102 in. (2.59 m)
WORKING DIMENSIONS (With 1 bale, deflector in spread position)
Width 130 in. (3.30 m)
Length 290 in. (7.37 m)
Height 102 in. (2.59 m)
WORKING DIMENSIONS (With 2 bales, deflector in spread position)
Width 130 in. (3.30 m)
Length 329 in. (8.35 m)
Height 102 in. (2.59 m)
CHASSIS FEATURES
Towing Arrangement Clevis type hitch
Jack Capacity 5,000 lbs. (2,273 kg)
Jack Travel 10 in. (25.4 cm)
Tires (2) 16.5 x 16.1 - 10 ply
Wheels (2) 16.1 x 12 - 8 bolt
Bearing Type Tapered Roller
BALE LOADER (with position indicator)
Type Twin boom arms with squeeze arms for square bales
Bale Tines Tubular Steel, 10" Float, 4 position width adjustment
BALE CONVEYOR
Type 3 roller chains with bolt-on cross slat
Drive Hydraulic Orbital Motor with Adjustable Flow Control
CHAIN CASE
Sealed oil lube chain case reverses rotation and increases rotor speed; double 60-roller chain
BALE SHREDDER CHAMBER
Max. Bale Size Round: 6 ft. long x 6.5 ft. dia. (1.83 m x 1.98m)
Square: 52" x 52" x 8 ft. (1.32 m x 1.32 m x 2.4 m)
Max. Bale Weight Each 2,200 lbs. (1,000 kg)
Rotor Length 108 in. (2.74 m)
Rotor Diameter 26 in. (66 cm) Flails extended
Rotor Bearing Ball, 1 3/4 in. (4.44 cm)
Number of Flails 40
Flail type Heavy duty, 7/16 in. (11.11 mm) thick, 3 lbs. (1.36 kg), Heat treated spring steel, swinging
Stripper Channels Optional
Number of Slug Bars 7
Slug Bar Single point, 5 adjustment settings
Delivery Right Hand Discharge
Deflector Split, Hydraulic with infinite settings through a 120° range
Max. Horizontal Spread Straw up to 50 ft. (15.24 m)
OPERATOR CONTROLS
Loader, Conveyor, Defector and Squeeze loader -1
Remote with electric over hydraulic controls
Bale Conveyor Speed - conveyor speed control valve
Slug bar - Hand lever with 5 settings and optional hydraulic adjustment
Deflector - Hydraulic with split deflector (can be offset)
REQUIREMENTS FOR OPERATION
PTO Horsepower Required 90 hp (67.1 kw) to 155 hp (115.6 kw)
PTO Type 1000 RPM, 1-3/8 in. (3.49 cm) diameter shaft with 21 splines.
Min. Tractor Hydraulic Output 8 gpm at 1500 psi (46 lpm X 10,345 kPa)
Tractor Hydraulic Controls 1 Double-Acting Control Valve with Quick Coupler Outlets
Tractor Weight Must be of equal or greater weight than that of a 2800 with 2 bales