WEIGHT
Total 4500 lbs. (2041 kg)
Tongue (Bale loader fully raised) 1300 lbs. (589.7 kg)
TRANSPORT DIMENSIONS (Bale loader fully raised, deflector folded)
Width 8 ft. 5 in. (2.57 m)
Length 14 ft. 3 in. (4.34 m)
Height 11 ft. 1 in. (3.38 m)
WORKING DIMENSIONS (With 1 bale, deflector in spread position)
Width 11 ft. (3.35 m)
Length 14 ft. 3 in. (4.34 m)
Height 11 ft. 1 in. (3.38 m)
WORKING DIMENSIONS (With 2 bales, deflector in spread position)
Width 11 ft. (3.35 m)
Length 19 ft. 7 in. (5.97 m)
Height 11 ft. 1 in. (3.38 m)
CHASSIS FEATURES
Towing Arrangement Clevis type hitch.
Jack Capacity 5000 lbs. (2273 kg)
Jack Travel 10 in (25.4 cm)
Tires 2) 12.5L x 15 - 8 Ply
Wheels 2) 10 x 15 - 6 Bolt, Drop Center
Bearing Type Tapered Roller
BALE LOADER
Type Integral 2 Stage, Twin Boom Arms
Bale Tines Tubular Steel, 10° Float, 4 Position Width
Adjustable Hydraulic Cylinder 4-1/2 in x 24 in (11.43 cm x 60.96 cm ), Double-Acting
BALE CONVEYOR
Type 3 Roller Chains with Bolt-On Cross Slat
Drive Hydraulic Orbital Motor with Adjustable Flow Control
BALE SHREDDER CHAMBER
Max. Bale Size 6 ft. long x 6-½ ft. dia. (1.83 m x 1.98 m)
Max. Bale Weight each 2200 lbs. (1000 kg)
Rotor Length 78 in. (1.98 m)
Rotor Diameter (Flails extended) 25 in. (63.5 cm)
Rotor Bearing Ball, 1-3/4 in. (4.44 cm)
Number of Flails 30
Rotor Speed 1300 RPM
Flail type Heavy Duty, 7/16 in. (11.11 mm) thick, 3 lbs. (1.36 kg), Heat Treated Spring Steel, Swinging
Number of Stripper Channels 1
Number of Slug Bars 5
Slug Bar Single point, 5 Adjustment Settings through a 180 Degree Range (optional hydraulic adjustment)
Delivery Right Hand Discharge
Deflector 6 Adjustment Settings through a 120 Degree Range
Max. Horizontal Spread Straw, up to 50 ft. (15.24 m)
OPERATOR CONTROLS
Loader 1 Tractor Double-Acting Hydraulic Valve
Bale Conveyor 1 Tractor Double-Acting Hydraulic Valve
Bale Conveyor Speed Conveyor Speed Control Valve
Slug Bar Hand Lever with 5 Settings (optional hydraulic adjustment)
Deflector Hand Lever with 6 Settings (optional hydraulic adjustment)
REQUIREMENTS FOR OPERATION
PTO Horsepower Required 65hp (48.5kw) to 155hp (115.6kw)
PTO Type 1000 RPM, 1-3/8 in. dia. PTO Shaft with 21 Splines choice of Constant Velocity or Standard PTO
Min. Tractor Hydraulic Output 8 gpm at 1500 psi (46 lpm x 10,345 kPa)
Tractor Hydraulic Controls 2 Double-Acting Control Valves with Quick Coupler Outlets
Tractor Weight Must be of equal or greater weight than that of a 2650 with 2 bales
