WEIGHT
Total 6,325 lbs (2,868.97 kg)
TRANSPORT DIMENSIONS (Empty , Loader Fully Raised)
Width 8 ft 11 in (2.71 m)
Length 16 ft 6 in (5.02 m)
Height 10 ft 9 in (3.26 m)
WORKING DIMENSIONS (With 1 Bale, Loader Fully Raised.)
Width 10 ft 3 in (3.12 m)
Length 16 ft 6 in (5.02 m)
Height 10 ft 9 in (3.26 m)
WORKING DIMENSIONS (With 2 Bales, Loader in Bale Transport)
Width 10 ft 3 in (3.12 m)
Length 22 ft 7in (6.88 m)
Height 10 ft 9 in (3.26 m)
CHASSIS FEATURES
Towing Arrangement Universal Hitch, Height Adjustable w/safety chain
Tires Road or Floatation
Axle Extension Optional 12 in.
Bearing Type Tapered Roller
BALE LOADER
Type Integral 2 Stage, Twin Boom Arms
Bale Tines Tubular Steel, 10° Float, 4 Position Width
Adjustable Hydraulic Cylinder 4-1/2 in x 24 in (11.43 cm x 60.96 cm ), Double-Acting
BALE CONVEYOR
Type Three roller chain with bolt-on cross slats, with ball bearing center support
Drive Hydraulic Orbital Motor with Adjustable Flow Control
BALE SHREDDER CHAMBER
Max. Bale Size 5-1/2 ft long x 6-1/2 ft dia (1.67 m x 1.98 m)
Max. Bale Weight each 2,000 lbs (907.2 kg)
Rotor Length 78 in. (1.98 m)
Rotor Diameter (Flails extended) 25-1/2 in (64.8 cm)
Rotor Bearing Ball, 1-3/4 in (4.46 cm)
Number of Flails 40
Flail type Swinging / Heavy Spring Steel
Screen Type Slotted, 2 Sizes Available
Transfer Auger Dia. 12 in (30.5 cm)
Number of Slug Bars 9-Additional, 10 Fixed optional
Slug Bar Single Point Adjustment with 5 Settings
BLOWER FAN
Size 44 in dia (111.76 cm)
Number of paddles 6
Bearings 2) 1-3/4 in (4.46 cm) Ball
OPERATOR CONTROLS
Two hydraulic outlets required
1 set for bale conveyor (comes with flow control)
1 set with in-cab electric over hydraulics (standard equipment) to control
loader function, spout/cannon for horizontal and vertical adjustment.
Requires 12 volt DC three pin power outlet.
SPOUT OPERATION
Vertical Fan Housing Rotated by Hydraulic Cylinder
Horizontal Spout Rotates 360 degrees
Outlet 3 ft. Curved Spout has an Adjustable Deflector
Protection Hinged Breakaway with shear bolt protection
REQUIREMENTS FOR OPERATION
PTO Horsepower Required 100 hp (76.6kw) to 155 hp (115.6 kw)
PTO Type 1000 RPM, 1-3/8 in. (3.49 cm) diameter shaft with 21 splines.
Min. Tractor Hydraulic Output 8 gpm @ 1500 psi (30.34 m @ 105.6 kgf/cm squared).
Tractor Hydraulic Controls 2 Double-Acting Control Valves with Quick Coupler Outlets
Tractor Weight Must be of equal or greater weight than that of a 2564 with 2 bales
