WEIGHT
Total 3,700 lbs. (1,679 kg)
SHIPPING DIMENSIONS
Width 8 ft. 5 in. (2.6 m) loader & deflector folded.
Length 12 ft. 9 in. (4.01 m)
Length 8 ft. 5 in. (2.6 m) caster wheels removed.
Height 6 ft. 5 in. (1.96 m) loader folded.
TRANSPORT DIMENSIONS
Width 10 ft. 8 in. (3.25 m)
Length 12 ft. 9 in. (4.01 m)
Height 6 ft. 5 in. (1.96 m) loader folded
WORKING DIMENSIONS (WITH BALE)
Width 13 ft. (3.96 m)
Length 12 ft. 9 in. (4.01 m)
Height 9 ft. 8-3/4 in. (3.05 m)
CHASSIS FEATURES
Hitch Semi-Mounted, attaches to lower Lift Links of Tractor's 3-PT Hitch<
Tires (2) 9.5 x 14 - 8-Ply
Wheels (2) 6 x 14 - 5 Bolt Drop Center
BALE CONVEYOR
Type 3 Roller Chains with Bolt-on Cross Slats
Drive Hydraulic Motor with Hydraulic Flow Control
BALE SHREDDER CHAMBER
Max. Bale Size 5-1/2 ft. long x 6-1/2 ft. dia. (1.68 m x 1.98 m)
Max. Bale Weight 1,500 lbs. (682 kg)
Rotor Length 78 in. (1.83 m)
Rotor Diameter (Flails extended) 25-1/2 ft. (64.77 cm)
Rotor Bearing Ball, 1-3/4 in. (4.44 cm)
Number of Flails 30
Flail Type Heavy Duty Flails, 7/16 in. (11.11 mm) Thick, 3 lbs. (1.36 kg), Heat Treated Spring Steel, Swinging
Number of Stripper Plates 1
Number of Slug Bars 5
Deflector Shield 6 Adjustment Positions through 120 degree range
Max. Horizontal Spread Straw up to 50 ft.
OPERATOR CONTROLS
Loader 1 set of Tractor Hydraulic Outlets
Bale Conveyor 1 set of Tractor Hydraulic Outlets
Bale Conveyor Speed Adjustable Hydraulic Flow Control Valve
Slug Bar Shim adjustable
Deflector Shield Position Hand Lever with Position Settings
REQUIREMENTS FOR OPERATION TRACTOR
PTO Horsepower required 65 to 155
hree Point Hitch CAT II / III
Min. Hitch Lift Capacity 4,000 lbs. (1,818.18 kg)
PTO Type 1000 RPM, 1-3/8 in dia Shaft with 21 Splines
Min. Hydraulic Output 8 gpm at 1800 psi (46 lpm x 10,345 kPa)
Hydraulic Remote Controls 2 Double-Acting Control Valves with Quick Coupler Outlets
Tractor Weight Must be of equal or greater weight than that of a 2100 BALEBUSTER and 1 Bale